Showing posts with label SOA. Show all posts
Showing posts with label SOA. Show all posts

Sunday, November 5, 2017

ORABPEL-05250 Error - JDeveloper Part2

ORABPEL-05250 Error - JDeveloper Part2

I was facing a strange issue while deploying the composite to the server but The composite was successfully build in JDeveloper but during deployment to the server received the following exception.

[02:02:37 PM] Sending archive - sca_SuppressSelectionFailure_rev1.0.jar
[02:02:49 PM] Received HTTP response from the server, response code=500
[02:02:49 PM] Error deploying archive sca_SuppressSelectionFailure_rev1.0.jar to partition "default" on server AdminServer [http://inkaban3ua-eai05:8000]
[02:02:49 PM] HTTP error code returned [500]
[02:02:49 PM] Error message from server:
There was an error deploying the composite on AdminServer: Error occurred during deployment of component: SuppressSelectionFailure to service engine: implementation.bpel, for composite: SuppressSelectionFailure: ORABPEL-05250

Error deploying BPEL suitcase.
error while attempting to deploy the BPEL component file "/fmw/config/admin/domains/SOACoreDomain/servers/AdminServer/dc/soa_1b6f358e-8947-4572-a573-e036770c0591"; the exception reported is: java.lang.Exception: BPEL 1.1 compilation failed

This error contained an exception thrown by the underlying deployment module.
Verify the exception trace in the log (with logging level set to debug mode).
.

[02:02:49 PM] Check server log for more details.
[02:02:49 PM] Error deploying archive sca_SuppressSelectionFailure_rev1.0.jar to partition "default" on server AdminServer [http://localhost:8000]
[02:02:49 PM] ####  Deployment incomplete.  ####
[02:02:49 PM] Error deploying archive file:/C:/JDeveloper/mywork/Application1/SuppressSelectionFailure/deploy/sca_SuppressSelectionFailure_rev1.0.jar
 (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)

Saturday, December 12, 2015

Issue with migrating BPEL from Orace SOA 11g to Oracle SOA 12C - An unexpected Server error has occurred in JDeveloper

Issue with migrating  BPEL from Orace SOA 11g to Oracle SOA 12C - An unexpected Server error has occurred in JDeveloper

Issue:

Trying to migrate some composites from Oracle SOA 11.1.1.5 to 12c. But after I load the project in JDeveloper 12c, its throwing the error "An unexpected Server error has occurred in JDeveloper" and its giving the options like 1)"save all files and exit" 2) Exit without saving 3) continue.

Selected “continue" option and after that tried opening "*.BPEL" file and its completely blank and also all the wires were disappeared from "Composite.xml".

1) Open your SOA project in JDeveloper version 11.1.1.5 and create the SAR ( deployable ) file into your deploy folder. ( Ex: scaSample_rev001.jar )

2) Close the JDeveloper 11.1.1.5 and now open JDeveloper 12c ,

3) File -> Import -> select "SOA Archive Into SOA Project" -> OK -> Next -> Composite Archive Browse to the above SAR file created ( Ex: scaSample_rev001.jar )

4) The composite.xml  and BPEL file will show the content now

Extension function error: Method not found 'setFlowInstanceTitle – Oracle SOA 12C(12.1.3)

Extension function error: Method not found 'setFlowInstanceTitle – Oracle SOA 12C(12.1.3)

We were getting the below exception while trying to set the title for composite instance in 12.1.3

<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/<https://urldefense.proofpoint.com/v2/url?u=http-3A__schemas.xmlsoap.org_soap_envelope_&d=AwMFAw&c=4ZIZThykDLcoWk-GVjSLm9hvvvzvGv0FLoWSRuCSs5Q&r=8qQMQBAbDh32F7DyV0m3CH9kXdKLrWigXrO0p0cWQEir0H7fTd2J8_NC1cElkvWv&m=dRon_z2evK4VjWGP0oY9FibkrtcDAvecx7CgL26qjC0&s=7zNuyckO1P0yz595V1RJcVFjt7td9IRnkJf6OEWgRdE&e=>">
  <env:Header>
     <tracking:faultId xmlns:tracking="http://oracle.soa.tracking.core.TrackingProperty<https://urldefense.proofpoint.com/v2/url?u=http-3A__oracle.soa.tracking.core.trackingproperty_&d=AwMFAw&c=4ZIZThykDLcoWk-GVjSLm9hvvvzvGv0FLoWSRuCSs5Q&r=8qQMQBAbDh32F7DyV0m3CH9kXdKLrWigXrO0p0cWQEir0H7fTd2J8_NC1cElkvWv&m=dRon_z2evK4VjWGP0oY9FibkrtcDAvecx7CgL26qjC0&s=DwqbKOWHhDFBuDf9yc8Ur29O_D7KfSBO_exS-pWTjNE&e=>">10002</tracking:faultId>
  </env:Header>
  <env:Body>
     <env:Fault>
        <faultcode>env:Server</faultcode>
        <faultstring>An error occurs while processing the XPath expression; the expression is oraext:setFlowInstanceTitle("Title").</faultstring>
        <faultactor/>
        <detail>
           <exception>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is oraext:setFlowInstanceTitle("Title").
The XPath expression failed to execute; the reason was: Extension function error: Method not found 'setFlowInstanceTitle'.
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.</exception>
        </detail>
     </env:Fault>
  </env:Body>
</env:Envelope>


To resolve the issue apply the patch with no 18310693.

Saturday, May 16, 2015

Suppressing the Selection Failure exception in Assign activity – Oracle SOA Suite

Suppressing the Selection Failure exception in Assign activity – Oracle SOA Suite

This post will explain how to suppress the Selection Failure exception BPEL Assign activity – Oracle SOA Suite
In BPEL Assign activity if the xpath returns empty result then SelectionFailure RuntimeFault will be thrown by the engine.

But some cases we may need to suppress the selectionFailure error while assigning the optional elements.

In my case I have a assign activity that will mapthe elements  input and input1 from inputVariable to result and result1 of outputVariable.


The input2 is optional and somecases input2 element  will not be available in the request payload.

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sup="http://xmlns.oracle.com/Application1/SuppressSelectionFailure/SuppressSelectionFailure">
   <soapenv:Header/>
   <soapenv:Body>
      <sup:process>
         <sup:input>?</sup:input>
      </sup:process>
   </soapenv:Body>
</soapenv:Envelope>

Don't support MessageVariable in fromPart - Oracle SOA Suite

Don't support MessageVariable in fromPart -  Oracle SOA Suite:

This error will be thrown while invoking the service with Multipart Message type and the receive activity uses the fromPart to retrieve the parts data and assign to a variables created based on message type or invoke activity uses toPart to assign the data to parts based message type variable.




To resolve this whenever retrieving or assigning values to parts in receive/invoke activity through fromPart or toPart use the element based variables instead using the message type based variable.

Wednesday, April 29, 2015

How to get the audit level settings of a Composite through Java - Oracle SOA Suite

How to get the audit level settings of a Composite through Java - Oracle SOA Suite

This blog will explain how to get the audit level settings of a Composite through Java in Oracle SOA Suite

import java.util.Hashtable;
import java.util.Set;

import javax.management.MBeanServerConnection;
import javax.management.ObjectName;
import javax.management.openmbean.CompositeData;
import javax.management.openmbean.CompositeDataSupport;
import javax.management.remote.JMXConnector;
import javax.management.remote.JMXConnectorFactory;
import javax.management.remote.JMXServiceURL;

import javax.naming.Context;

import oracle.fabric.composite.model.CompositeNameModel;

public class GetCompositeAuditLevel {
    static MBeanServerConnection m_connection = null;

    public static String getCompositeAuditLevel(String compositeName,String version) throws Exception {
        String auditLevel = "";
        String mBeanName = "*:j2eeType=SCAComposite,revision=" + version + ",*,name=\"" + compositeName + "\"";
        Set<ObjectName> mbeans = m_connection.queryNames(new ObjectName(mBeanName), null);
        System.out.println(mbeans);
        ObjectName mbean = (ObjectName)mbeans.iterator().next();
        javax.management.openmbean.CompositeData[] properties =(javax.management.openmbean.CompositeData[])m_connection.getAttribute(mbean,"Properties");
        if (properties.length > 0) {
            for (int i = 0; i < properties.length; i++) {
                CompositeDataSupport cds = (CompositeDataSupport)properties[i];
                if (cds.get("name").equals("auditLevel")) {
                    auditLevel = (String)cds.get("value");
                    break;
                }
                auditLevel = "Inherit";
            }
        }
        if (auditLevel.equals("Inherit")) {
            auditLevel = getSOAINFRAAuditLevel();
        }
        return auditLevel;
    }

    public static String getSOAINFRAAuditLevel() throws Exception {
        String auditLevel = "";
        String mBeanName ="*:*,name=soa-infra,type=SoaInfraConfig,Application=soa-infra";
        Set<ObjectName> mbeans = m_connection.queryNames(new ObjectName(mBeanName), null);
        ObjectName mbean = (ObjectName)mbeans.iterator().next();
        auditLevel = (String)m_connection.getAttribute(mbean, "AuditLevel");
        return auditLevel;
    }


    public static String getDefaultCompositeRevision(String partiitionName,
                                                     String compositeName) throws Exception {
        ObjectName compositeLifeCycleMBean = null;
        Set queryResult = m_connection.queryNames(new ObjectName("*:j2eeType=CompositeLifecycleConfig,*"), null);
        if (!queryResult.isEmpty()) {
            compositeLifeCycleMBean =(ObjectName)queryResult.iterator().next();
        }
        //CompositeDN - DomainName/CompositeName
        String compositeDN = partiitionName + '/' + compositeName;
        String revision = null;
        CompositeData deployedComposite =(CompositeData)m_connection.invoke(compositeLifeCycleMBean, "getDefaultComposite",
                                               new Object[] { compositeDN },
                                               new String[] { String.class.getName() });
        if (deployedComposite != null) {
            CompositeNameModel cm = CompositeNameModel.parseDN((String)deployedComposite.get("DN"));
            revision = cm.getRevision();
        }
        return revision;
    }

    public static MBeanServerConnection getMbeanServerConnection(String host,int port,String userName,
                                                                 String password) throws Exception {
        String jndiroot = "/jndi/";
        MBeanServerConnection m_connection = null;
        try {
            Hashtable jndiProps = new Hashtable();
            jndiProps.put(Context.SECURITY_PRINCIPAL, userName);
            jndiProps.put(Context.SECURITY_CREDENTIALS, password);
            jndiProps.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote");

            JMXServiceURL serviceURL =new JMXServiceURL("t3", host, port, jndiroot +"weblogic.management.mbeanservers.runtime");
            JMXConnector m_connector =JMXConnectorFactory.newJMXConnector(serviceURL, jndiProps);
            m_connector.connect();
            m_connection = m_connector.getMBeanServerConnection();

        } catch (Exception e) {
            e.printStackTrace();
        }
        return m_connection;
    }


    public static void main(String[] args) {
        try {
            m_connection =getMbeanServerConnection("localhost", 7001,"weblogic", "welcome1");
            String defaultVersion =getDefaultCompositeRevision("default", "TestComposite");
            String auditLevel=getCompositeAuditLevel("TestComposite", defaultVersion);
             System.out.println("auditLevel:"+auditLevel);
        } catch (Exception e) {
            e.printStackTrace();
        }
    }

}

Jar files required in the class path:

  • SOA Runtime jars 
  • weblogic.jar

Tuesday, April 28, 2015

Saturday, April 18, 2015

Wednesday, February 18, 2015

The Admin console is not up/accessible – Oracle SOA Suite

The Admin console is not up/accessible –  Oracle SOA Suite

We were facing a strange issue in our Oracle SOA Suite production server in Solaris, we could not able to access the admin console even though the server is started properly and there is no error in the log file.

We were able to telnet the admin server listen address from Admin server node but not able to do it from other nodes.

The root cause of the issue is with Gateway server, the admin server listen address is not listed on the Gateway - the gateway server is not online (the servers listen address is configured in Gateway).

After Solaris admin team made the Gateway server online, we were able to see the admin server listen address listed on the gateway.

After restarting the admin server we were able to access the console page.

The following command can be used for checking the Gateway server status

 netstat –r  

Saturday, December 13, 2014

java.net.ConnectException,Bootstrap to server failed while deploying the compoite - Orace SOA Suite

 java.net.ConnectException,Bootstrap to server failed while deploying the compoite - Orace SOA Suite

Sometimes we may receive the following exception while deploying the composite to Oracle SOA Suite server using even though the sever is running fine and reachable.

oracle.rc.asadapter.connection.ConnectionException
at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10JndiProvider.getPresentation(Weblogic10JndiProvider.java:86)

Caused by: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://127.0.0.1:8000: Bootstrap to localhost/127.0.0.1:8000 failed. It is likely that the remote side declared peer gone on this JVM]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)

Caused by: java.net.ConnectException: t3://127.0.0.1:8000: Bootstrap to localhost/127.0.0.1:8000 failed. It is likely that the remote side declared peer gone on this JVM

Caused by: java.rmi.ConnectException: Bootstrap to localhost/127.0.0.1:8000 failed. It is likely that the remote side declared peer gone on this JVM
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:334)


This issue can be resolved by configuring valid machine IP or complete name of the machines, including the domain extension as listen address in weblogic server.

Monday, September 22, 2014

XML-22036: (Error) Cannot convert result tree fragment to NodeSet - Oracle SOA Suite 11g

XML-22036: (Error) Cannot convert result tree fragment to NodeSet - Oracle SOA Suite 11g

We are getting the below exception in runtime while passing the parameter and accessing the same from XSLT in Oracle SOA Suite.




The following exception occurred while attempting to execute operation copy at line 139
-<exception class="com.collaxa.cube.xml.xpath.XPathException">
-<parsererror style="display: block; white-space: pre; border: 2px solid #c77; padding: 0 1em 0 1em; margin: 1em; background-color: #fdd; color: black">
<h3>This page contains the following errors:</h3>
<div style="font-family:monospace;font-size:12px">
error on line 7 at column 1: Extra content at the end of the document
</div>
<h3>Below is a rendering of the page up to the first error.</h3>
</parsererror>
XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc('xsl/DistinctPayload.xsl', $inputVariableLocal.payload, 'FlowSubscriberVar2', $FlowSubscriberVar2).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: oramds:/deployed-composites/default/PPDSOM_EventManager_rev1.0/xsl/DistinctPayload.xsl<Line 8, Column 82>: XML-22036: (Error) Cannot convert result tree fragment to NodeSet..
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
-<stack>
<f>com.collaxa.cube.xml.xpath.BPELXPathUtil.evaluate#262</f>
<f>com.collaxa.cube.engine.ext.bpel.common.BPELWMPHelper.evalFromValue#339</f>
<f>com.collaxa.cube.engine.ext.bpel.v1.wmp.BPEL1AssignWMP.__executeStatements#137</f>
<f>com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform#158</f>
<f>com.collaxa.cube.engine.CubeEngine.performActivity#2543</f>
<f>com.collaxa.cube.engine.CubeEngine._handleWorkItem#1165</f>
<f>com.collaxa.cube.engine.CubeEngine.handleWorkItem#1071</f>
<f>com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#73</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#220</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#328</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#4430</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#4361</f>
<f>com.collaxa.cube.engine.CubeEngine._createAndInvoke#698</f>
<f>com.collaxa.cube.engine.CubeEngine.createAndInvoke#555</f>
<f>com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke#673</f>
<f>com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke#293</f>
<f>...</f>
</stack>
</exception>

Wednesday, September 17, 2014

SCAC-50012 - Oracle SOA Suite 11g

SCAC-50012 - Oracle SOA Suite 11g

This error will occur most of time compiling the Oracle BPEL component in Oracle SOA Suite with java embedded activity, If there is any issue with the java code this exception will be thrown.

We were facing the SCAC-50012 exception with the following code.

String orderID  =  ((oracle.xml.parser.v2.XMLElement) getVariableData("inputVariable","payload",'/client:process/client:input')).getFirstChild().getNodeValue();
String Title=("OrderID: " +orderID);                                        
setCompositeInstanceTitle(Title);

The actual  issue with the XPATH expression specified within the single quote(copy paste issue), the compilation became successful after converting the single quotes to double quotes.

String orderID  =  ((oracle.xml.parser.v2.XMLElement) getVariableData("inputVariable","payload","/client:process/client:input")).getFirstChild().getNodeValue();
String Title=("OrderID: " +orderID);                                        
setCompositeInstanceTitle(Title);

Monday, September 1, 2014

Dynamic Endpoint Implementation through DB Table –Oracle SOA Suite

Dynamic Endpoint Implementation through DB Table –Oracle SOA Suite

The below document explain the approach to store change the endpoints of the service dynamically in Oracle SOA Suite.



Download Load_Balancer_Probe_SOA-INFRA.pdf

Friday, July 25, 2014

Handling Parallel events through OnEvent event handlers – Oracle SOA Suite

Handling Parallel events through OnEvent event handlers – Oracle SOA Suite

This post will explain, how to handle Parallel events through OnEvent event handlers in Oracle SOA Suite 11g



Download Handling_Parallel_events_ OnEvent_event_handlers_V1.pdf

Wednesday, June 25, 2014

javax.management.MBeanException: The configuration file, deployed-composites.xml, does not contain the composite-revision element

javax.management.MBeanException: The configuration file, deployed-composites.xml, does not contain the composite-revision element

We were receiving the following exception while deploying the composite to the SOA server in Solaris.

The exception was thrown while activating the component.

compositeMgrTask:
     [java] Connecting to: service:jmx:t3://localhost:8004/jndi/weblogic.management.mbeanservers.runtime
     [java] connection initiated
     [java] javax.management.MBeanException: The configuration file, deployed-composites.xml, does not contain the CRMASYNC/zz!5.3.19 composite-revision element.
     [java]     at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doInvoke(OracleStandardEmitterMBean.java:986)

The actual exception is the component was not deployed successfully due to some exception and it is trying to activate the same .

The exception while deploying the component is

[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=/shared/11g/soa_deploy/code/config/scripts/../../LoadBalancerProbe/zz/deploy/sca_zz_rev5.3.19.jar
[deployComposite] Adding sar file -/shared/11g/soa_deploy/code/config/scripts/../../LoadBalancerProbe/zz/deploy/sca_zz_rev5.3.19.jar
[deployComposite] INFO: Creating HTTP connection to host:localhost, port:8004
[deployComposite] INFO: Received HTTP response from the server, response code=500
[deployComposite] ---->response code=500, error:There was an error deploying/undeploying composite on SOA1: Error in reading data from deployer client.: /var/tmp/sar_base_dir_07be0448-8481-4ade-a2e9-253e5a8ba33c/sca_zz_rev5.3.19.jar (No such file or directory).

Based on the error, the deployer could not able to retrieve the jar file from the tmp location.
After analysis, the /var/tmp space is full and the script could not able to write the jar file.
We can use df -kh command to find the space utilization


How to Fix

To resolve the issue login as root user and clear the /var/tmp folder.

Saturday, June 7, 2014

Load Balancing Rules for Oracle SOA Suite Infrastructure

Load Balancing Rules for Oracle SOA Suite Infrastructure

This blog explain the details about the load balancer rule setup for Oracle SOA Suite infrastructure.



Download Load_Balancing_Rules_For_SOA.pdf

Sunday, June 1, 2014

Approach to Resolve the Load balancer routing the Oracle SOA Suite Request to Unavailable SOA-INFRA

Approach to Resolve the Load balancer routing the Oracle SOA Suite Request to Unavailable SOA-INFRA 

The below document explain the approach to resolve the Load balancer routing the Oracle SOA Suite request to unavailable SOA-INFRA.



Download Load_Balancer_Probe_SOA-INFRA.pdf

Friday, May 30, 2014

Oracle BPEL Vs. Oracle BPM

Oracle BPEL Vs. Oracle BPM

For the recent project i was comparing the Oracle BPEL and Oracle BPM and thought of sharing the same.
This document is based on my understanding and views not of oracle views.




Download Oracle_BPEL_Vs._Oracle_BPM.pdf

Friday, May 23, 2014

Component Metrics are Unavailable for the SOA Composite in EM console - Oracle SOA Suite 11g

Component Metrics are Unavailable for the SOA Composite in EM console - Oracle SOA Suite 11g

I was facing a strange issue with Oracle SOA Suite EM console. Whenever opening the SOA Composite the component metrics are not getting displayed and it is shown as Unavailable.


The issue is only happening in Development environment but it is working fine in all the other environments.
I could not able to find any exception related to this issue in any of the log files.

Unfortunately the Component metrics are getting displayed after refreshing the SOA Composite(from right corner of EM page as shown in the above diagram) from EM console


Deployment plan file to replace the Binding Adapter Properties/Attributes – Oracle SOA Suite

Deployment plan file to replace the Binding Adapter Properties/Attributes – Oracle SOA Suite

The deployment plan file will help us to dynamically replace the Oracle SOA Suite Composite properties.

This post explain the steps to replace the Properties/Attributes of the Direct Binding Adapter in Composite.xml. The same steps can be used to replace the Properties/Attributes of all the Binding Adapters.

Generate the Plan file:

The plan file can be generated through JDeveloper or through ANT script.

Generating Plan file through JDeveloper:

Right Click on Composite.xml and click on generate config Plan.


Change the generated plan file contents accordingly to replace the properties and attributes of the composites. 

Add the required attributes to the corresponding Binding and change the values accordingly(by default the attributes will not be added to the corresponding binding in the plan file) and also change the value of required properties accordingly.